Well-loging Course

Homework 1: Determine the permeability of these two zones by their SP logs.  sp2.PNG (Download Here)

Homework 2:  Determine the properties of these layers.  Log01 (Download Here)

Homework 3:  Use Crossplot for properties determination. Log02 (Download Here)

Cross plot: You can download cross plot for above exercise  Crossplot.jpg (Download Here)

Hamidreza_Asaadian_-_Well-loging.pdf (Download Course notes)

Stimulation and Completion Course

!!Note!!: Send your reports (word-type file and cfw file) with your name and student number to Hamidreza.asaadian@hotmail.com.

The deadline for each homework is every FRIDAY before the next class. BE AWARE!!! The deadline will not be extended. Here you can find the Headlines of this course. Headlines (Download Here)

Homework 1: An oil well with the following details is to be acidized with an acid solutions treatment which is described in the following tables. The well‘s drilling and completion have finished recently and faced to partial damage. Simulate the operation with StimCADE software and report that. Optimize the operation. Find the best way to stimulate that formation which means finding the optimum injection rate, volume, and the number of operation stages and reach to the most reduction in skin factor.

HW_1.pdf (Download Here)

Homework 2: Acidizing Fluid Analysis.

1. Add the following additives and see their effect of them on the acidizing operation.
2. For previous homework do the sensitivity analysis over the concentration of HCl acid and report your understanding. (Examine HCl 5, 10, and 28%).
3. Change the Emulsion Acid Composition and report their difference in operating results.

HW_2.pdf (Download Here)

Homework 3: Apply the following details about Sarvak’s subzones there are 4 different treatment ways in the table below that are suggested to operate. Analyze them with software and report the best one. (Packer depth = 10320 ft)

HW_3.pdf (Download Here)

Homework 4: A gas well with the following details is to be acidized with an acid solutions treatment which is described in the following tables. The well‘s producing gas for long time and now it has faced high pressure drop and has low productivity. Simulate the operation with StimCADE software and report that. Optimize the operation.

HW_4.pdf (Download Here)

Improved Oil Recovery (IOR) Course

Slides

You can download course slides from the below links. It helps you to review taught in this course. Please have a look over them and be updated with class.

References

Also, you can find and download a wonderful handbook of production engineering by this link:

Clegg - Petroleum engineering handbook, Production Operations Engineering. vol.4, Soc. of Petroleum Engineers (2007) (Download Here)

Course Project

Please read the main points of the project instructions carefully. Wishing you all the very best of luck. For further possible questions, do not hesitate to contact me.

Class Project List (Download Here)